Mopar Dodge RAM 10-24 2500 3500 Truck 3rd Third Brake Light Gasket CHMSL leak repair

DMT 2010-19 Dodge RAM 2500 3500 third brake light / Center High Mounted Stop Light (CHMSL) gasket. Fixes 3rd brake light leaks. This material will not shrink or take a set like the cheap factory PVC foam gasket. This gasket is a .187" thick, automotive spec, EPDM foam rubber gasket. 

2010 10 2011 11 2012 12 2013 13 2014 14 2015 15 2016 16 2017 17 2018 18 2019 19 2020 20 2021 21 2022 22 2023 23 2024 24 Dodge Ram 2500 3500

Note: The old gasket has to be cleaned off the light. When I put this on my own RAM getting ALL the old gasket and adhesive off was a real PIA but necessary. Shown in the 3rd picture is the gasket after about 3 months of use (testing) on my truck. 

Note: This is NOT for the 3rd brake light with camera. NOT FOR 1500 trucks. 

I've been getting the following questions;
- Is this is a lot thicker than the factory one. NOPE. Gaskets don't work that way. It's slightly thicker. Much thicker would only warp the light. This is the highest quality EPDM foam rubber. THAT'S the difference from the cheap materials the factory used.
- Should I use glue or silicone or cement with the gasket. NOPE.
- If a tree fell on my truck will it still seal the light. NOPE.
- Will it prevent a flat tire. NOPE. 

DO NOT purchase if you don't think you have the skills required to remove the adhesive backing!!!

WARPED LAMP HOUSINGS FROM HOT INCANDESCENT BULBS - I have had 2 customers now who said they have had to replace their  3rd brake lamp because the housing was warped in the center. One customer said he switched to an LED bulb. Great idea.

LASTLY, this is a high quality gasket. IF there is still a leak then IT WASN'T THE GASKET. Check the satellite antenna (gasket), check the rear window seal, check the plastic roof seam sealing strips, CHECK FOR WARPED LIGHT HOUSING.

Materials
.187" high quality automotive spec black foam rubber with adhesive backing to attach to light. Much better material than OEM