Mopar E Body 70-71 Barracuda Challenger Shaker Baseplate to Hood Seal - ASSEMBLED

DMT ASSEMBLED shaker air cleaner base to hood perimeter seal for  1970 or 71 E bodies; Barracuda, Challenger. 92"

1970 70 1971 71 Barracuda, Cuda, Challenger 

Mopar part# 4418658, other A0206

These like all our products are test fit on an actual part. This was test fit on an actual shaker baseplate. Cut to 92" with  the ends glued together using modern adhesive. The factory used weatherstrip adhesive that eventually pulled apart. A 12" piece of "gaffers tape" is supplied to be put over the seam like the factory did. The adhesive on the seam may be "messy" (just like the original) but it gets covered with the strip of gaffers tape supplied.

Note: We also offer this where you can cut to length and join (good luck :) )

Note: NO THE AIR CLEANER BASEPLATE IS NOT INCLUDED. YES, PEOPLE ASK. IT SHOWS HOW THE SEAL FITS/LOOKS WHEN INSTALLED.
Update: JFC, may have to remove the picture showing how it fit on the baseplate because so many people said they "assume" the baseplate was included. WRONG!

NOTE: THIS ONLY FITS 1970 AND 71 SHAKER BASEPLATES. HAVE HAD PEOPLE BUY FOR THE FAKE SHAKER LOOK FOR MODERN CHALLENGERS. IT AINT FOR THAT!

Materials
EPDM sponge rubber like OE