Mopar E Body Challenger 70-74 Door Handle Air Seal Foams WITH PLATES

DMT Set of door panel handle area air seal foam attached to nylon plates with push pins for 1970-74 E Challenger Only.

The smaller pieces get sandwiched behind the door handle. The larger nylon plates mount with push pins below the door handle. Think this is because the door handle and window crank is in a diff position than the Barracuda so this plate was used to compensate for/seal the difference in openings. They must have used a common inner door stamping. Obviously the outer was different because the 2 cars had different body lines.

1970 70 1971 71 1972 72 1973 73 1974 74 Challenger, TA

Materials
Charcoal foam mounted to .080" nylon plates. With correct plastic push pins.

Mopar Part# 3499182

180128 - 1970-74 Challenger; Barracuda; Cuda; Interior Door Handle to Door Panel Baffles; Black;LH and RH; includes Push-in Clips