Mopar E Body 72-74 Door Window Stabilizers / Guides - Set of 4

DMT Set of (4) door window guides /stabilizers for 1972 (March 72) to 1974 E Bodies

1972 72 1973 73 1974 74 Barracuda, Challenger, Cuda

Note: These "late model" versions were a cheapened version of the 70-71 stabilzers that the factory created for 72-74 models.

Quick history of why/what "stabilizers were used............ 

The factory originally used nothing early on in 70
Then added the 70 style with screws on the outside of door glass
Then ALSO added the 70-71 style that bolts on the inside of the door glass

The reason for adding these is because, as the story goes, senior management was disappointed with door rattle. I have all 4 in my 71 and it sounds like a new car door when closing. No rattles.

PERSONALLY, I WOULD USE BOTH THE 70 STYLE SCREW ON, ON THE OUTSIDE, AND THE 70-71 STYLE BOLT ON, ON THE INSIDE, FOR A 72 BUILD, LIKE THE FACTORY DID ON LATE 71 MODELS.

Note - these are not meant to rub on the windows but are more of an anti rattle and a guide. I have mine set very close but not rubbing. You'll see ones that are set too tight because there will be 2" wide scratch marks on the glass because of dirt in the "hairy" covering over 50 years.

Mopar part# 3581975