Mopar A Body 70-76 Dart Sport, Demon, Duster Rear Pop Out Quarter Window Seals & Install Kit

DMT Rear pop out quarter window seals and installation kit for 70-76 Duster, 71-72 Demon, Dart Sport.

1970 70 1971 71 1972 72 1973 73 1974 74 1975 75 1976 76 Dart Sport, Demon, Duster

These seals come with the foam and tape installation kit and the flocked covered mylar pieces with plastic clips that are the hinge at the front of the pop out window. Thick foam tape rolls are used to seal top and bottom of frame to body. White poly foam strips to hold lower edges of seals against body. Butyl caulk strips to seal joints on bottom of pop out frame. And now a STAINLESS tube nut & screw set to replace rivets when reassembling pop out window frames

Material
Seals - EPDM rubber. Exact same material as OEM

Pop out window installation kit
- (2) 54" rolls of single side adhesive back foam tape for top and bottom of qtr window frames to seal frame to body
- (4) 21" long white poly foam strips that are placed behind inner and outer lower flaps of rubber seal to hold seal out against body panels
- (2) strips of black butyl caulk. 2" strips placed on the lower rear edges of the pop out frames to seal joint in frame 
- (2) flocked mylar hinge strips with (4) sets of plastic "shoes" and pins

- NOW INCLUDES STAINLESS tube nut & screw set to replace rivets when reassembling pop out window frames. 
The rivet holes will have to be drilled open a very small amount with a std 7/32" (.218") drill bit. Apply blue Locktite on the screw when assembling.