Mopar A B E Body 68-71 Headlight Adjuster Set STAINLESS - 2 HEADLIGHT

DMT 8pc headlight adjustment screw set for 2 HEADLIGHT models of 1968-71 A, B and E bodies. Springs and spring attachment screws are made from stainless steel so they wont rust!

1968 68 1969 69 Barracuda

1968 68 1969 69 1970 70 1971 71 Dart, Demon, Duster, Scamp, Valiant

1968 68 1969 69 1970 70 Belvedere, Charger, Coronet, GTX, Roadrunner, Satellite

1970 70 1971 71 AAR, Barracuda, Challenger, Cuda, TA

Mopar part# Adjustment Screw Assy 2785842, Spring 3868549

I'M NOT A RESTORATION EXPERT BUT THIS IS HOW I REPLACED THE ONES IN MY OWN CHALLENGER. I USED A 5/16" DRILL BIT TO DRILL OUT MOST OF THE OLD PLASTIC PIECE TO MAKE THEM EASIER TO PULL OUT. THEN USED NEEDLE NOSE VICE GRIPS TO PULL OUT THE OLD METAL PIECE. I REMOVED THE METAL PIECE OFF THE NEW ADJUSTER. USED A 1/4" SOCKET EXTENSION TO TAP THE NEW METAL PIECE IN PLACE. USED A PLASTIC MALLET TO TAP THE NEW PLASTIC INTO THE METAL RETAINER (REMOVE THE SCREW FIRST - I SHOULDN'T HAVE TO SAY THIS). IF YOU DRILL A HOLE IN YOUR FENDER OR ACCIDENTIALLY SMASH YOUR WINDSHIELD, THATS ON YOU. EVERYONE HAD TO KNOW THE LIMIT OF THIER CAPABILITIES.

Materials
Zinc plated steel adjustment screws, STAINLESS STEEL springs and spring attachment screws.