Mopar A B E Body 63-76 Speedo Speedometer Cable to Firewall Grommet

DMT Speedometer cable to firewall grommet for all 63-76 A Bodies, 64-76 B bodies and 70-74 E bodies. Also all Dodge trucks from 72-93.
Flexible enough to slip over that HUGE plastic connector on the end of the speedometer cable without tearing.

Fits a .875" hole. This grommet has a .300" hole. Perfect for speedometer cables. Have another grommet with a smaller .180" hole. Perfect for smaller dia cables and fuel lines. Have another grommet with .300" hole 

Mopar part# 2401772

NOTE: DOES NOT FIT 62-63 B BODIES OR 62-70 C BODIES. THEY USED A GROMMET THAT FITS A LARGER 1.187" HOLE. THAT PART# IS CHR2426712

This is a high quality part. We manufacture the majority of the products we sell and  only carry the highest quality parts that we don't manufacture. We have checked the fit and appearance. All our rubber products are made using automotive spec EPDM and are cryogenically deflashed so they have perfect, not ragged edges. Also no strong rubber smell.

Installation Note: Customers have asked how to get this grommet over the end of the plastic ferrule on the later model speedo cables or the nut on the earlier speedo cables. I have included a picture showing the grommet stretched over a 1/2" drive 3/8" socket. I used some WD40 to help get the grommet on the socket. The large end of the socket can be placed over / next to the ferrule or nut and then slid onto the cable. 

Material(s)
Automotive spec EPDM rubber like OE.