DMT

Mopar Generic A B C E Body 62-93 Air Cleaner Lid Seal

DMT reticulated rubber air cleaner lid seal for all Mopar air cleaners from 62-93. This will actually fit most makes and models from the muscle car erra from 62-76 including AMC, Ford, Mercury, Chevrolet, GM, Pontiac, Oldsmobile A Body1963 63 1964 64...

DMT

Mopar A B C Body 66-93 Shaker, Air Grabber, Clutch, Control Cable to Firewall Grommet

DMT Shaker cable, air grabber cable,  control cable, later model clutch cable to firewall grommet for all 66-74 A, B, C and E bodies. Also used on fuel tank vent lines on 70-71 cars with ECS. Fits a .875" hole. This grommet has a small ...

DMT

AMC 63-77 Heater Control Cable Clip 4000417

DMT Heater control cable clip for all 63-77 AMC models NOW with stainless attaching screw AMC part# 400 0417 Material(s)Black zinc plated spring steel just like OEM with #6-3/8 stainless screw  

DMT

Mopar Heater Control Cable Clip, Air Grabber Cable Clip, Shaker Cable Clip 6015143

DMT Heater control cable clip, Air Grabber control cable clip, Ramcharger control cable clip, Shaker control cable clip, 66-70 B body water valve control cable clip NOW with stainless attaching screw Mopar part# 6015143 Material(s)Black zinc plated...

DMT

Mopar A Body 70-74 Dart Demon Hood Scoop to Hood Seals

DMT 2pc set of hood scoop seals for 70-74 A bodies - Dart, Demon & Duster.Fits the factory approx. 4.125" holes. Mopar part# 3355950   (Old DMT part# ABX6972AC01 ) MaterialsFirm black rubber reproductions of OEM seals.

OTHER

Mopar B Body 69-72 Air Grabber / Ramcharger Box to Air Cleaner Seal

DMT Air grabber / Ramcharger box to to hood seal for 1969-1971 Plymouth GTX,1969 1970 1971 1972 Plymouth Road Runner,1971 1972 Dodge Charger, 1969 1970 Dodge Coronet/Super Bee.  1969 69 1970 70 1971 71 1972 72 GTX Roadrunner Charger...

OTHER

Mopar B Body 69-72 Air Grabber / Ramcharger Box to Air Cleaner Seal WITH Clips & Screws

DMT Air grabber / Ramcharger box to to hood seal WITH (16) screws and J clips req'd to install for 1969 1971 Plymouth GTX,1969-1972 Plymouth Road Runner,1971-1972 Dodge Charger, 1969-1970 Dodge Coronet/Super Bee.  1969 69 1970...

DMT

Mopar B Body 69-72 Air Grabber / Ramcharger Box to Air Cleaner Seal Clips & Screws

DMT Air grabber / Ramcharger box to to hood seal fastener set for 1969-1971 Plymouth GTX,1969-1972 Plymouth Road Runner,1971-1972 Dodge Charger, 1969-1970 Dodge Coronet/Super Bee.  1969 69 1970 70 1971 71 1972 72 GTX Roadrunner Charger...

DMT

Mopar B Body Early 69 Roadrunner Air Grabber Side Drain Flaps

DMT 2pc Air grabber box side drain flaps with OEM correct foam rubber filled clips.  Early 1969 69 Roadrunner GTX Air Grabber Ramcharger Note: Late 69 and 70 Roadrunner, GTX, Coronet, Suber Bee used the 4 individual drain flaps instead of...

DMT

Mopar B Body Late 69 Roadrunner 69-70 Coronet Air Grabber Side Drain Flaps

DMT 4pc Air grabber / Ramcharger box side drain flaps with OEM correct foam rubber filled clips.  LateER 1969 69 Roadrunner GTX Air Grabber 1969 69 1970 70 Coronet Super Bee Ramcharger Note: Early 69 boxes used long single piece drain flaps...

DMT

Mopar B Body 1969-1/2 A12 Roadrunner Coronet Air Cleaner Baseplate to Hood Seal

DMT 6 pack, 6 bbl air cleaner base to hood perimeter seal for 1969-1/2 A12 Coronet Roadrunner 19691969-1/2 Coronet Roadrunner Part# A0203 (Previous DMT# BXX6969AC01) The ends need to be glued together. . A 12" piece of "gaffers tape" is supplied to...

DMT

Mopar E Body 1970 Barracuda AAR Challenger TA Air Cleaner Baseplate to Hood Seal

DMT 6 pack, 6 bbl air cleaner base to hood perimeter seal for  1970 E bodies; Barracuda, Challenger. 1970 Barracuda AAR Challenger TA Mopar Part# 3577462 (A0200) The ends need to be glued together. A 12" piece of "gaffers tape" is supplied to be put...

DMT

Mopar E Body 1970 Barracuda AAR Challenger TA Air Cleaner Baseplate to Hood Seal - ASSEMBLED

DMT 6 pack, 6 bbl air cleaner base to hood perimeter seal for  1970 E bodies; Barracuda, Challenger. Cut to length 75" and ends glued with a modern, made for rubber (crazy) glue. A 12" piece of "gaffers tape" is supplied to be put over the seam like...

DMT

Mopar E Body 70-71 Barracuda Challenger Shaker Baseplate to Hood Seal

DMT shaker air cleaner base to hood perimeter seal for  1970 or 71 E bodies; Barracuda, Challenger.  1970 70 1971 71 Barracuda, Cuda, Challenger  Part# A0206Mopar part# 4418658 The ends need to be glued together. A 12" piece of "gaffers...

DMT

Mopar E Body 70-71 Barracuda Challenger Shaker Baseplate to Hood Seal - ASSEMBLED

DMT ASSEMBLED shaker air cleaner base to hood perimeter seal for  1970 or 71 E bodies; Barracuda, Challenger. 92" 1970 70 1971 71 Barracuda, Cuda, Challenger  Mopar part# 4418658, other A0206 These like all our products are test fit...

DMT

Mopar 69 1/2 A12 70 71 AAR T/A Shaker Air Cleaner Seal Joint Tape

DMT 1pc 2"W x 11"L 1969-1/2 A12 440 6bbl Roadrunner, 1970 AAR Cuda, T/A Challenger or 70-71 E Body Shaker Hood air cleaner base to hood foam rubber seal joint tape.  This was used by the factory to cover the joint in the air cleaner seal. (It...

DMT

Mopar E Body 70-71 Barracuda Challenger Shaker Trim Ring Gasket

DMT laser cut shaker hood trim ring to hood plastic gasket for 1970 or 71 E bodies; Barracuda, Challenger.  1970 70 1971 71 Barracuda, Cuda, Challenger  These like all our products are test fit on an actual part. This was test fit on an NOS...

DMT

Mopar E Body 70-71 Barracuda Challenger Shaker Baseplate Warm Air Door Seal

DMT Shaker hood baseplate to shaker bubble warm air door seal gasket for 1970 or 71 E bodies; Barracuda, Challenger.  1970 70 1971 71 Barracuda, Cuda, Challenger  Note: Attach to baseplate using yellow weatherstrip adhesive like factory. Also...

DMT

Mopar E Body 70-71 Barracuda Challenger Shaker Trim Ring Nuts 14pc STAINLESS

DMT 14pc shaker trim ring to hood nuts for 1970 or 71 E bodies; Barracuda, Challenger.  1970 70 1971 71 Barracuda, Cuda, Challenger  Note: Original trim ring studs are 10-24. Reproduction are 10-32. THESE ARE FOR ORIGINAL TRIM RINGS. Note:...

DMT

Mopar E Body 70-71 Barracuda Challenger Shaker Trim Ring Nuts 14pc ZINC

DMT 14pc shaker trim ring to hood nuts for 1970 or 71 E bodies; Barracuda, Challenger.  1970 70 1971 71 Barracuda, Cuda, Challenger  Note: Original trim ring studs are 10-24. Reproduction are 10-32. THESE ARE FOR ORIGINAL TRIM RINGS...

DMT

Mopar B Body 70-72 Road Runner 71 72 Charger Air Grabber Trap Door, Lower Edge Side Seals RP300R

DMT 2pc Air grabber door seals for lower edge of door on both sides. Seals door edges to underside of the hood when door is open. 1970 70 1971 71 1972 72 Roadrunner 1971 71 1972 72 Dodge Charger These are pre punched and die cut with all holes and...

DMT

Mopar B Body 70-72 Road Runner 71 72 Charger Air Grabber Trap Door, Lower Edge Side Seals & Screws RP300R

DMT 2pc Air grabber door seals for lower edge of door on both sides with black plated stainless screws. Seals door edges to underside of the hood when door is open. 1970 70 1971 71 1972 72 Roadrunner 1971 71 1972 72 Dodge Charger These are pre...

DMT

Mopar B Body 69-70 Coronet Ramcharger Air Box to Hood Seals

DMT top of Ramcharger box to underside of hood seal for 1969-70 Coronet and Super Bee.  Materials.500" x .500" x 54" butt spliced soft black automotive spec foam rubber box to hood seal just like OEM.(2) .375" x 375" soft black automotive spec...

DMT

Mopar B Body 68 69 GTX Roadrunner Air Box to Hood Seal

DMT top of air grabber box to underside of hood seal for 1968 1969 Roadrunner & GTX.  Materials.500" x .500" x 54" butt spliced soft black automotive spec foam rubber just like OEM.Attach with a 3M Black Weatherstrip Adhesive.  

DMT

Mopar B Body 70 71 72 Roadrunner 71 72 Charger Air Grabber Box to Hood Seal

DMT air grabber box top to underside of hood seal for 70-72 Roadrunners and 71-72 Dodge Chargers 1970 70 1971 71 1972 72 Roadrunner1971 71 1972 72 Charger NOTE: Have Air Grabber door to hood seals in another listing Materials.125" Black...

DMT

Mopar B Body 70 Road Runner 71 72 Charger Air Grabber Door to Hood Seal Gasket Tape

DMT Air grabber to hood seal foam rubber tape for 1970 Roadrunners and 1971-72 Dodge Chargers. Seals door to hood and protects door from rubbing on hood.(71-72 Roadrunners are different - available in another listing) 1970 70 Roadrunner 1971 71 1972...

DMT

Mopar B Body 71 72 Satellite Air Grabber Door to Hood Seal Gasket Tape

DMT Air grabber door to hood seal foam rubber tape for 1971 1972 Plymouth Satellite Roadrunner. Seals door to hood and protects door from rubbing on hood. (71-72 Chargers are different - available in another listing) 1971 71 1972 72 Roadrunner,...

DMT

Mopar B Body 71 72 Roadrunner Satellite Air Grabber Bubble Hump Seal Tape

DMT 71-72 Plymouth Road Runner air grabber housing to top of hood sealing strip (seals and protects housing from rubbing on paint) MaterialAutomotive spec 1/8"T x 1/2"W x 12' neoprene foam rubber, adhesive backed tape strip...

DMT

Mopar Air Grabber / Ramcharger Seal U-Nut J-Clip

DMT Air grabber / Ramcharger box to to hood seal screw U-nut / J-clip for 1969-1971 Plymouth GTX,1969-1972 Plymouth Road Runner,1971-1972 Dodge Charger, 1969-1970 Dodge Coronet/Super Bee.  1969 69 1970 70 1971 71 1972 72 GTX Roadrunner Charger...

DMT

Mopar Air Grabber / Ramcharger Seal & Coolant Overflow Reservoir Screw

DMT Air grabber / Ramcharger box to to hood seal screw1969-1971 Plymouth GTX,1969-1972 Plymouth Road Runner,1971-1972 Dodge Charger, 1969-1970 Dodge Coronet/Super Bee. ALSO 73-76 coolant overflow tank / reservoir screw. With correct "AF" logo 1969...

OTHER

Mopar NOS A B E Body 72-76 Air Cleaner Thermostat

DMT NOS air cleaner thermostat for 72-76 A, B & E bodies with foam gasket and (2) 3/16" push-nuts. Not many of these left on the planet! Note: This part number was used for various different versions of these thermostats. LOOK AT THE PICTURE. This is...

OTHER

Mopar NOS A B E Body 70-71 Air Cleaner Thermostat

DMT NOS air cleaner thermostat for 70-71 A, B & E bodies with foam gasket and (2) 3/16" push-nuts. Not many of these left on the planet! Note: This part number was used for various different versions of these thermostats. LOOK AT THE PICTURE. This is...